Vandex Plug is a cementitious waterproof plugging compound for sealing active leaks and moisture ingress. It is suitable for use on the following substrates:

• Concrete
• Masonry
• Earthenware
• Stone
  
  

Vandex Plug is supplied as a powder that is mixed with water to form a thick paste. Once mixed, the paste is pressed into the leaking crack or hole using a trowel. After approximately 30 seconds, the Vandex Plug will have set and the leak will be sealed. The surface can then be levelled off using a levelling trowel.

Vandex Plug is approved under WRAS in the UK for use in drinking water structures.

Additional information

Size : 15KG
Brand : Vandex
GTIN : No Specific GTIN
Part Number : VDX-P15
Manufacture : Vandex
Effective Treatment : Waterproofing, Plugging Compound
Service Life : Not Specified
Size(s) & Packaging : 15 kg bucket
Accreditation : No Specific Accreditation
Appearance : Grey Powder
Storage : Store below 30°C in a dry, well-ventilated area, away from ignition sources. Keep out of direct sunlight and store in a frost-free environment
Shelf Life : 12 months
Coverage : Approx. 0.3 kg per water leak

The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control. 

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.