Vandex Injection Mortar (VIM) is a product specially developed to stop rising damp in old brick- and stonework structures, granite boulder walls etc. Vandex Injection Mortar consists of Portland cement, specially treated quartz sand and a compound of active chemicals. By means of a chemical reaction between reactive salts in the structure, moisture and the Vandex chemicals a crystalline growth will take place which will block all pores and fine cracks. When Vandex Injection Mortar is injected into holes drilled at regular intervals where the damp-proof course (DPC) is required, this crystalline growth will spread into the area adjacent to each core of Vandex Injection Mortar (VIM) and will thus create a barrier which moisture cannot pass. The mortar will tend to fill any fine cracks and voids and will set to form a solid plug thus replacing the material removed by the drilling operation.

Benefits

• Barrier against rising damp in any type of masonry
• Suited also for stonework
• Ready-mix powder for making injection mortar

DataSheets

Product datasheet
Safety datasheet





The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control. 

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.