ES100 is a two part, epoxy based damp proof membrane.

Usage/purpose

ES100 has been developed specifically for suppressing residual moisture in concrete and sand/cement subfloors and provides a guaranteed surface damp proof membrane with a single coat liquid application.

Safety data sheet must be read and understood before use.

Product Benefits

• Accommodates up to 97% RH
• Solvent free
• Very cost effective single coat application reducing time on site
• Suitable with underfloor heating
• Suitable for heated concrete and sand cement screeds (provided the surface temperature does not exceed 27°C in accordance with BS 8203 and BS 5325)

Application: Trowel

Colour: Grey

Pack Size: 10kg & 25kg

Two-Pack

Minimum Applied Thickness:

250-350 microns

Mixing Ratio:

3.4:1 by weight

Pot Life (at 20°C):

1 hour 25 minutes

Coverage:

Approximately 20-24m² per 10kg

Product Certifications:

BS 8203, BS 5325

Shelf Life (from date of manufacture):

6 months

Product Data Sheet Links

Product Data Sheet

Safety Data Sheet - Part A

Safety Data Sheet - Part B

The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control. 

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.