When fire strikes, gaps around doors allow fire and smoke to spread. This can be stopped by fitting intumescent door seals. Surface mounted fire door seals make this installation quick and easy and are part of the upgrade from door to fire door, fitting the strips to the frame of the door or to the fire door itself. They are also used to upgrade older fire doors which had been installed without fire door seals.
Easy to fit surface-mounted fire door seals
60 minutes of fire integrity - suitable for a gap of up to 11mm at the head of the door!
No rebating or drilling needed, the seals are self-adhesive
Seals stop both fire and smoke (intumescent strip and brush seals)
Save time and labour costs
Only requires a minimum 4mm gap around the door
The single door kit includes:
5 x 1.05m seal Pieces
1mm thick strips for fitting to the hinge jamb (2 strips)
2mm thick strips for fitting to closing lock jamb and door head (3 strips)
The double door kit includes:
8 x 1.05m seal Pieces
1mm thick strips for fitting to the hinge jamb (4 strips)
2mm thick strips for fitting to closing lock jamb and door head (4 strips)
Supplied in sets for single or double doors
Available in white or brown
Can be fitted directly over hinges with no hinge binding
Independently tested to BS 476-22:1987
Colour: Brown or White
Testing: BS476 Part 22 & 23 and Certifire approved under certificate CF358
Brand:
Fireplug
weight:
12000.0
Product Condition:
New
Updating Order Details
Please do not refresh or navigate away from the page!
Related Products
2.1m Fire Seal Door Set
Intumescent Strip, Fire Only Door Set
Product Features
Intumescent fire and smoke seals are for fitting into a rebate on the fire door or frame so that when subjected to heat,...