SikaSeal®-627 Fire Collar+ is a fire resistant prefabricated pipe collar consisting of a metal casing and an intumescent insert for interior penetration sealing applications. SikaSeal®-627 Fire Collar+ is

• Restores the fire resistance performance of a wall or a floor which incorporates combustible pipes, combustible pipe insulations or conduits.
  
  
• Can be combined with Sikacryl®-621 Fire+ and SikaSeal®-626 Fire Board+.

 
Advantages

• Up to 4 hours fire resistance.
• Highly intumescent - volume expansion up to 17 times original size.
• Large pipe range covered.
• Tested for a large variety of relevant wall and floor types.

Colour

Product Information

Chemical Base

Shelf Life

Storage Conditions

The product must be stored in original, unopened and undamaged packaging in dry conditions at temperatures between +5 °C and +25 °C.
Always refer to packaging.

Dimensions

SikaSeal®-627 Fire Collar+ is available in the following dimensions:

Technical Information


Service Temperature

-20 °C min. / +70 °C max.


Resistance to fire

Refer to ‘Approvals / Certificates’ or contact Sika Technical Services for specific information.

Data Sheets

Product Data Sheet 

Packaging

The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control. 

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.