Sikacryl®-625 Fire+ is a 1-part fire resistant, ablative acrylic coating used for the installation of SikaSeal®-626 Fire Board+.

• Covers linear seals up to 120 mm in combination with mineral fibre backing.
• Edge coating of SikaSeal®-626 Fire Board+ when installed on the outer face of a wall or floor.

Advantages

• Up to 4 hours fire resistance.
• 1-part ready to use, easy to apply.
• Easy to clean.

Colour

White

Product Information

Chemical Base

Shelf Life

Storage Conditions

The product must be stored in original, unopened and undamaged packaging in dry conditions at temperatures between +5 °C and +25 °C.
Always refer to packaging.

Density

~1.3 kg/l                                                         (ISO 1183-1)

Technical Information

Service Temperature

−20 °C min. / +70 °C max.

Resistance to fire

Refer to SikaSeal®-626 Fire Board ‘Approvals / Certificates’ or contact Sika Technical Services for specific information.

Data Sheets

Product Data Sheet 
Safety Data Sheets 
Declaration of Performance
Environmental Product Declarations Sheets


Packaging

The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control. 

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.