QB50 QuelStop Ablative Coated Mineral Wool Fire Batt is a coated mineral wool board used to reinstate the fire rating of wall and floor constructions where they have been penetrated by services.

Features & Benefits

• Up to 2 hour fire rating
• Suitable for use in flexible walls, rigid walls and floors
• Suitable for use around cables, cable bunches, cable trays, cable ladders and non-combustible pipes
• Also suitable for use around plastic pipes and insulated non-combustible pipes with the addition of other Quelfire products
• Can be used as a blank seal as a head of wall detail
• Can be installed into both lined and unlined apertures in partitions walls
• Can be installed as a single or double batt seal
• Can be pattress fitted / face fixed to walls
• Tested with plasterboard ceilings and steel composite profile decks

Regulations

• Fire resistance testing to BS EN 1366-3:2009
• EI30, EI90, EI120
• Classified to EN 13501-2: 2007 + A1: 2009
• Acoustic tested to EN 10140 to 60dB

All orders are usually despatched within 24 hours of receiving cleared payment (Mon–Fri).

The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control. 

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.