Designed to prevent the spread of fire and smoke through joints and openings in fire rated walls and floors (including openings formed around building service penetrations); Protecta FR Acrylic will also maintain acoustic design performance. In addition, this mastic is used in combination with Protecta FR Board. 

Protecta FR Acrylic is tested with many different types of penetrations through many different constructions and is a CE-marked sealant for fire rated joints and penetrations, class EI 240.

Key Features

• High end formula, certified in most countries Worldwide
• Faster application times and minimal material use due to its ability to

    achieve high fire ratings and single sided installations

• Classified for fire sealing all types of constructions such as drywalls,

    masonry walls, concrete walls, concrete floors and composite floors

• Classified for fire stopping of service penetrations in cross-laminated

     timber walls and floors

• Classified for fire sealing all types of building service penetrations such

     as cables, cable bundles, cable conduits, steel pipes, copper pipes,

     composite pipes, PVC pipes, PE pipes, ABS pipes, PP pipes
     and PEX pipe[1]in-pipes

• Classified with commonly used pipe insulations such as stone wool,

     glass wool, elastomeric, phenolic and PU-foam, both interrupted and

     continuous through the fire seal

• Classified for fire sealing against timber, steel and aluminium such as

     door and window frames

• Causes no deleterious effects on cPVC pipes like BlazeMaster,

     supported by mechanical testing evidence

• May be installed in drywalls with or without framing around the

     opening

• Very high sound insulation
• Not power conductive
• Air, smoke and gas tight, tested at 600 Pascal
• Available in the Polyseam Eco-Foil system
• Low emissions - environmentally and user friendly
• Simple to apply with a smooth surface finish
• No priming necessary for application to most materials
• Suitable for most surfaces, including concrete, masonry, steel, gypsum,

     glass, plastics and most non-porous surfaces

• Hardens quickly and tack free after 1 hour (the fire performance

     specification of the joint filler has been derived when the joint filler has

     been let to cure for a month)

• Minimum 18 months storage time (under correct conditions)
• Minimum 30 years working life