Proctor Proctorwrap Reflect reather Membrane

proctorwrap-reflect
£187.24 inc. tax

£156.03 ex. tax
? Tax based on United Kingdom.
Dimensions*
Proctor Proctorwrap Reflect reather Membrane Summary

Proctor Proctorwrap Reflect reather Membrane

Proctorwrap Reflect® is a vapour permeable low emissivity membrane specifically designed to enhance the thermal performance of timber and steel frame structures. Proctorwrap Reflect is a non-woven polypropylene foil laminate, providing breathability, as well as secondary protection to the building during construction. The product is installed on the external face of the timber frame, foil side face out, similar to that of a traditional breather membrane but with added thermal benefits.

Proctorwrap Reflect complies with the vapour resistance requirements set out by TRADA and the NHBC. The existing legislation requires a breather membrane to have a vapour resistance not greater than Sd 0.12m / 0.6 MNs/g. Proctorwrap Reflect has a vapour resistance of Sd 0.08m / 0.4 MNs/g.

The A. Proctor Group can provide a range of solutions, with U-values, down to as low as 0.18W/m2 K in standard timber frame walling applications.

Once Proctorwrap Reflect is applied to the walls, the primary wall covering should be installed within 3 months.

Proctorwrap Reflect must be covered as soon as practically possible on completion of installation. Any damaged areas should be repaired or replaced before completion.


Key Features

  • R value 0.71
  • Competitively priced
  • Enhanced foil surface
  • Low vapour resistance - complies with TRADA and NHBC requirement
  • High strength to weight ratio
  • W1 water penetration
  • 1.5, 2.7 & 3 metre wide rolls

Datasheets

Product Datasheet
Specification Performance
Installation Guide

 



    The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control. 




    Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.

    weight:
    5001.0
    Product Condition:
    New
    Updating Order Details
    Please do not refresh or navigate away from the page!
    Product Added to your Cart
    x

    -------- OR --------