PipeBloc PCP Pipe Collars are an intumescent composite based on graphite intumescent and designed to provide a high volume expansion and pressure seal. The PipeBloc PCP Achieved EI120 being tested to EN 1366-3, with a maximum diameter of 250mm and with a shell depth of 30 and 40mm. The PipeBloc PCP can be installed in flexible wall, rigid wall and floor constructions and is compatible with polypropylene (PP), polyethylene (PE) and PVC pipes.
Tested with various end capping configurations both uncapped U/U and capped U/C & C/U pipes.
CE Marked
Certifire CF 5367
Coated Steel and Stainless Steel shell with intumescent insert
Fire Resistance testing to EN 1366-3 EI30, EI60, EI90, EI120, EI240
Tested to BS476 20 & 22
Pipe sizes from 32mm to 250mm
End Capping – Uncapped U/U and Capped U/C & C/U pipes
3 Fixing Tabs
Compatible with PP, PE, PVC-V, ABS, SAN & PVC Pipes
The advantages of the PipeBloc PCP® Pipe Collar are as follows:
• Suitable for use with flexible walls with 100mm minimum thickness, rigid wall with 100mm minimum thickness and rigid floors with 150mm minimum thickness. • Allows thermal and mechanical movement of pipe. • Halogen free, contains no asbestos, ceramic and is environmentally friendly. • Ease of fixing to suit location - 4 fixing types available • Not effected by fungus, vermin, rodents or moisture • Tested for internal and external use • Long life
All orders are usually despatched within 24 hours of receiving cleared payment (Mon–Fri).
The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control.
Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.
Brand:
PipeBloc
weight:
800.0
Product Condition:
New
Updating Order Details
Please do not refresh or navigate away from the page!
Related Products
FSI Pyrocoustic Intumes..
Pyrocoustic Sealant is a water based acrylic sealant used to reinstate the fire resistance of wall and floor constructions where apertures are penetrated by multiple services and linear gap seals where...
110mm Stopseal Pipe Wrap The Stopseal Pipe Wrap is an intumescent composition which is designed to provide high volume expansion and a pressure seal. The product is fire tested to BS 476 part 20 giving...
PyroPro HPE Sealant A graphite based product which when exposed to fire, expands protecting penetrations including pipes and cables: maintaining the integrity and insulation performance of the seal. PyroPro...
Pack of 100 - Spiral Pigtail screw fixings For use to fix mineral fibre board and other insulation materials. Specification: 1.6mm dia Galvanized spring wire Tools: Pozidrive / Philips screw driver bit...
PipeBloc EL is designed and tested to seal service penetration apertures containing plastic and metallic pipes both with and without insulation. PipeBloc EL is formulated with thermoplastic composites...