125mm Stopseal Pipe Wrap

The Stopseal Pipe Wrap is an intumescent composition which is designed to provide high volume expansion and a pressure seal. The product is fire tested to BS 476 part 20 giving a fire resistance of up to 2 hours.

The pipes tested included UPVC, Polypropylene and ABS up to a size of 200mm diameter pipes through concrete / block work floors and walls.

Advantages of the Stopseal Pipe Wrap:

• Suitable for wall and floor installation.
• The product is based on an EPDM composite and is therefore non-toxic.
• Halogen free, contains no asbestos, ceramic mineral fibres and is environmentally friendly.
• Not affected by fungus, vermin or rodents.
• Remains flexible between -40ºC to +130ºC, long life and is easy to use.

SPECIFICATION

Pipe Diameter                           40mm, 55mm, 63mm, 75mm, 82mm, 110mm, 125mm 160mm & 200mm

Width (Nominal)                         60mm

Thickness (Nominal)                  4mm up to 110, 8mm thereafter

Density                                      1.29g/cm³

Volume Expansion at 300ºC      14 times

Fire Resistance                         Up to 2 hours BS 476 part 20

INSTALLATION

Installation details and technical support are available from our technical department.  Data sheets and MSDS are provided with all our products.

• Place pipe wrap around pipe and secure with adhesive tape supplied.
• Adjust the position of the pipe wrap so that the edge is approximately 10mm within the wall or floor surface.
• Fill annular gap with Silverseal Fire Mortar.

COMPLIANCE

Stopseal Pipe Wraps are manufactured in the EU, meeting the highest quality standards in compliance with ISO EN 9001. 
 

STORAGE AND DISPOSAL

Stopseal Pipe Wraps are not affected by outdoor environments.  However, for long-term storage and ease of installation, we recommended that it should be stored indoors.  No limit is given for the shelf life as the product will not deteriorate in storage.  


The pipe wrap is supplied with all the necessary approvals needed to satisfy a Fire Officer. 

All orders are usually despatched within 24 hours of receiving cleared payment (Mon–Fri).

The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control. 

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.