Firefly Phoenix - 10m & 25m available
10m x 1.3m & 25m x 1.3m Fire & Smoke Barrier - 120 minutes fire integrity
Cavity Fire Barriers developed primarily for the Construction Industry are a flexible, lightweight and easy to install solution to all compartmentation requirements, traditionally serviced by the use of a “mineral fibre” type fire barrier.
Benefits
- FIREFLY Phoenix provides 120 minutes Integrity as a barrier, restricting the passage of smoke and flame across large roof voids.
- Tested to include penetrations and services while maintaining performance in-situ.
- Lightweight, flexible, easy to handle and Installer-friendly smoke and flame barrier system.
- Tested to BS476 and independently certified by IFCC/Kiwa
- FIREFLY Phoenix is supported by a full range of FIREFLY ancillary products (stainless steel staples, sealants, fixing, supports) to provide the ability to install a fully tested system.
FIREFLY PHOENIX – Fire & Smoke Barrier
DESCRIPTION |
Smoke and flame barrier, woven glass fabric |
CERTIFICATION |
Third Party Certification by IFCC 1418 |
APPLICATION |
Vertical use only (see Phoenix Horizontal for alternative) |
WEIGHT |
440g/m2 nominal |
THICKNESS |
0.34mm nominal |
TEST IN ACCORDANCE WITH |
BS 476 Part 20/22 1987 120 minutes Tested for integrity only |
FLAMMABILITY |
BS 5438 / 6249 “A” rating (highest possible pass) Fabric is self-extinguishing when subject to this test |
ROLL LENGTH |
10 metres or 25 metres |
ROLL WIDTH |
1.3 metres nominal |
Please Click Here for Staple Gun and Staples
Please note PHOENIX does not provide any insulation just integrity (fire and smoke). By insulation we mean heat insulation, so that in the event of a fire PHOENIX will stop the flame and smoke from penetrating the barrier, but will not stop the heat from the fire from passing through. If insulation is a requirement, you will need to consider one of the following products, Apollo Lite, Titan Lite or Zeus Lite.These products all offer integrity and insulation at various levels. Please contact us with details of your project so we can provide you with further information on these products.
Product Data Sheet
Firefly Phoenix Data Sheet
Firefly Phoenix General Assembly
Firefly Phoenix Side Fixing
Firefly Phoenix Top Fix Timber Truss
Firefly Phoenix Timber-Penetrations
Firefly Phoenix Double-Fold-Vertical-Joint
Firefly Phoenix Double-Fold-Horizontal-Joint
Firefly Product Summary
Firefly Phoenix should be installed by competent personnel in full accordance with manufacturers installation guide information. For further information, please call us on 024 7697 3127.
All orders are usually despatched within 24 hours of receiving cleared payment (Mon–Fri).
The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control.
Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.