PFC Corofil Intumescent Pipe Wraps are designed and tested to provide a fire-resistant seal in flexible walls, rigid walls, rigid floors, and PFC Corofil Coated Panels where service penetrations pass through them containing plastic pipes and metallic pipes with insulation.

Tested to EN1366-3, PFC Corofil Intumescent Pipe Wrap offers fire resistance periods of up to 120 minutes for differing services and wall/floor constructions.

Sizes are available to suit pipes from 32mm up to 250mm diameter. In the event of a fire, the intumescent will expand when heated, providing a closure of combustible pipes to prevent the passage of fire between compartments.

PFC Corofil Acoustic Pipe Wraps are supplied in assembled form. The intumescent in the wrap is contained within a lightweight PVC carrier bag and is installed around the pipe at the soffit and upper face of rigid floors or on both faces of the wall depending on the application.

The annular gap around the pipe wrap should be sealed using PFC Corofil Intumescent Acoustic Sealant

The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control. 

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.