Fire stopping for single or multiple service penetrations.

PFC Corofil Coated Panel System is a coated mineral wool board used to reinstate the fire resistance performance of wall and floor constructions where they have been provided with apertures for the penetration of single or multiple services.

Coated Panel System is available in 1200mm x 600mm panels, 50mm thick with a density of 140kg/m3 and 60mm thick with a density of 160kg/m3. The panel is supplied coated on both faces.

Key points:

• Can be installed in apertures up to 730mm wide and 1200mm high or 600mm x 600mm depending upon the application
• For use with plastic pipes, metallic pipes, cables, cable trays and cable ladders

PFC Corofil Acoustic Intumescent Sealant is required to seal all joints and junctions during the sealing process. Acoustic Intumescent Sealant has a separate technical data sheet, which you can download from the relevant product page.

Please refer to the technical data sheet for further information on substrates, installation instructions and performance data for tested applications.

Data Sheets

Manufacturer Data Sheet
Safety Data Sheet

The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control. 

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.