1200 x 600 x 100mm - FJ240 Spanatherm is a strong pre-engineered rock fibre movement-joint fire seal, vertical fibre orientation, that allows significant movement accommodation at the same time as providing fire integrity, insulation and an effective smoke seal. FJ240 is a dense rock mineral fibre board Class A1 core with a BC0 aluminium foil applied to two faces. This provides a vapour barrier and a smoke seal when correctly sealed.

FJ240 is a cost effective and efficient product for compartment reinstatement at edge of slab, or vertically, to external façade of the structure. Suitable for both static or movement joints.

Benefits

• Up to 2 hours integrity and 90 minutes insulation - Tested to BS 746 20-22
• Dry fit system
• Easy to install
• Vapour, smoke and acoustic seal
• Can be installed prior to the application of the cladding system
  

The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control. 

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.