FF197 is a modified, single component, fire rated polyurethane foam. FF197 is used to seal linear gaps throughout the fire rated areas of a building and has a Fire Rating up to 240 minutes.
Only supplied in boxes of 12 canisters.

This product can be used with Illbruck Foam Guns

Limitations 
As with all PU foams, FF197 will not adhere to Teflon, polyethylene or silicone coated surfaces. The cured foam is adversely affected by UV light and should be covered with a suitable sealant such as FS703 silicone or FS701 intumescent acrylic.

Colour:
Pink

Packaging:
750 ml pressurised canister (12 per box)

Benefits:
- Certified to the latest British and European standards EN 1366-4, DIN 4102 Pt 1 (B1) and EN 13501: Pt 2
- Cures to form a semi-rigid foam that is able to accommodate some degree of movement of the joint
- Acts as an effective fire seal for up to 4 hours (BS EN 1366-4) when used with FS701 intumescent acrylic or FS703 silicone sealant. 

Data Sheets Links
FF197 Technical Data Sheet
FF197 Safety Data Sheet
FF197 Application Guidance
FF197 Declaration Of Performance

YouTube Video Link






All orders are usually despatched within 24 hours of receiving cleared payment (Mon–Fri).

The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control. 

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.