THERM-A-STRIP is a flexible phosphate based intumescent product giving an approximate ten fold increase in volume when exposed to heat. Its activation temperature is around 180ºC. THERM-A-STRIP is supplied in a natural white finish which, because of its resistance to both atmospheric moisture and carbon dioxide, requires no additional surface protection. The material may be decorated with a wide range of conventional finishes without impairing the performance. It is available with or without a self-adhesive backing strip.

Technical Specification

Application
Glazed apertures in fire resisting doors and screens
Fixing
Self-adhesive
Performance
Fire tested to BS 476-20:22
Certifire – referenced in various certificates
Material
Mono Ammonium Phosphate
Length(s) (mm)
2100
Size(s) (mm)
10×2 / 15×2 / 20×2 / 25×2 / 50×2
Colour(s)
White

 
Data Sheets

Manufacturer Data Sheet

The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control.

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.