An Intumescent Strip Sealant 20mm x 3mm which can provide 60 minutes resistance to the passage of fire when used to glaze fire rated glass into internal doors and timber screens.

KEY FEATURES

Fully tested to provide 60 minutes resistance to the passage of fire and smoke in timber doors and screens.
Suitable for use by FIRAS Accredited Glaziers.
BWF Certifire Scheme Certificate No. CF297 for use in timber screens and doors for periods of 60 minutes fire resistance.
Excellent high tack surface provides good adhesion.
Tested with semi insulating and fully insulting glasses. To give 60:0 and
60:60 (Integrity:Insulation) respectively.
Can be overcoated with paints and decorative wood stains.
Very cost effective compared to other rigid/semi-rigid fire resistant materials.
Non-toxic.


Technical Specification

Application
Glazed apertures in fire resisting doors and screens
Fixing
Self-adhesive
Performance
Fire tested to BS 476-22 & BS EN 1364-1
Certifire CF297
Material
Intumescent strip sealant
Length
105m box, 15m coil
Size(s) (mm)
20×3
Colours
Brown (BRN), White (WHT) 

Data Sheets

Manufacturer Data Sheet

Norseal Data Sheet

Certification CF 297

The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control.

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.