18.5L - SteelMaster 1200WF is a one component waterborne acrylic thin film intumescent coating. Independently approved for fire protection of structural steel exposed to cellulosic fire. Can be used as mid coat or finish coat in atmospheric environments. Suitable on approved primers on carbon steel substrates.

 
Typical use
Specially designed as a reactive fire protection system for steel constructions. Designed to protect for up to 180 minutes on a wide range of I section beams, columns and hollows. Fire tested and approved to BS 476 part 20/21.

Suitable for structural steel exposed to internal environments.

Benifits

• Low thickness required
• HAPs free, green product
• Increases productivity
• Ready to use, easy airless spray application
• Quicker project completion
• Low VOC, low environmental impact
• Tested to BS 476 (20 and 21)

Product type
Cellulosic fire protection

Area of use
Structural steel exposed to a wide range of corrosive environments up to high as a part of a complete coating system.

Substrate
Structural steel and carbon steel

Colours 
White

Application
Brush, Spray

Product Data Sheet

Technical Data Sheet

Safety Data Sheet

Application Guide

SteelMaster 1200WF Brochure

The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control. 

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.