Pilot QD Primer is a surface tolerant zinc phosphate pigmented primer that can be applied directly to steel, aluminium or wood. It is quick and easy to apply with good adhesion properties. 

Product type: Anticorrosive coating

Product Mixing
Single Pack

Typical use

Marine:
Recommended for engine room, topside, deck and superstructure.
 

Protective: suitable for a wide range of industrial structures

Substrate: Properly prepared steel, mild steel, carbon steel, aluminium, wood, new or aged coatings, in atmospheric conditions.

Benefits

• Lower your application cost
• Improve your efficiency
• Prolong maintenance interval

Approvals and certificates

Low flame spread certificate acording to IMO FTPC Part 5 (IMO Res. A.653(16) / IMO FTPC Annex 2 Item 2.2.

Grain, Newcastle Ocupational Health

Food, Compliant with USA, FDA Title 21, Part 175.300 for dry solids

Additional certificates and approvals may be available on request.

Colours
red, grey and white 

Pack Sizes Available
5L or 20L

Product Data Sheet
Technical Data Sheet
Safety Data Sheet
Application Guide

The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control. 

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.