5L - Pilot ACR is a one component physically drying acrylic coating. It has a semi gloss finish with good gloss retention. It is fast drying. It can be used direct to metal. To be used as topcoat in atmospheric environments. It can be applied at sub zero surface temperatures. The product is certified not to spread surface flames.

Protective

Recommended for refineries, power plants, bridges and buildings. Suitable for a wide range of industrial structures.

Reduces your application cost

Pilot ACR requires no mixing and has no pot life restrictions, which reduce time spent on preparation, waste, spillage and leftovers.

Quick drying time enables you to use, move or store your painted object shortly after painting.

Improves your productivity
Both quick drying and the possibility to save one coat, mean more output than what is obtainable with conventional, thin film acrylics or alkyds.

Tested to perform well and cure fast even at minus 10˚C. In cold climates this means there is no limitation to the painting season, and you can reduce heating costs.

Reduces your maintenance cost
Time to first maintenance is increased as Pilot ACR offers very good gloss retention and can be used as a C3 system when overcoated by itself (acc. ISO 12944)

Marine
Recommended for topside, superstructure and interior use.

Product type     
Topcoat

Area of use
Suitable for a wide range of industrial structures.

Substrate          
Coated surfaces

For use on
Steel, Galvanized Steel 

Application

Brush
Spray

Colour
Available in a full colour range, including most RAL & BS4800 colours.
 

Product Data Sheet
Technical Data Sheet
Safety Data Sheet
Application Guide
Topcoats Brochure

Colour Chart
BS4800 Colour Chart
Ral Colour Chart

The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control. 

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.