5L - Two component chemically curing aliphatic acrylic polyurethane coating. It has a glossy finish with very good gloss retention. It is a high solids product. The product has good application properties with low dry spray.

To be used as topcoat in atmospheric environments.

Product type: Topcoat

Area of use: Marine: Topsides, decks and superstructures

Protective: Offshore environments, refineries, power plants, bridges, buildings and a wide range of industrial structures

Substrate: Coated surfaces

Colour: Good colour - and gloss retention

Available in a full colour range, including most RAL & BS4800 colours.

Excellent application properties by airless spray.

Tailor made variants available
Hardtop XP Alu – Aluminium finish version 
Hardtop XPF – Fast curing version 
Hardtop XPL – Low gloss version 

Pack Size: 5L Two Pack - Part A & Part B

Approvals and certificates
This product contributes to the Green Buildings Standard credits. Please see section Green Building Standards.
NORSOK System 1, Rev.5
Grain, Newcastle Occupational Health
Food, Compliant with USA, FDA Title 21, Part 175.300 for dry solids
When used as part of an approved scheme, this material has the following certification:
- Low Flame Spread in accordance with EU Directive for Marine Equipment. Approved in accordance with parts 5 and 2 of Annex 1 of IMO 2010 FTP Code, or Parts 5 and 2 of Annex 1 of IMO FTPC when in compliance with IMO 2010 FTP Code Ch. 8

Additional certificates and approvals may be available on request.

Application
Brush
Spray
Roller

Data Sheet
Technical Data Sheet
Safety Data Sheet Comp A
Safety Data Sheet Comp B
Application Guide
Topcoat Brochure

Colour Chart
BS4800 Colour Chart
Ral Colour Chart


The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control. 

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.