Interthane 990 - Topcoat
Interthane 990 Topcoat
Interthane 990 polyurethane topcoat for structural steelwork
A two component acrylic polyurethane finish giving excellent durability and long term recoatability.
Typical thickness: 50-75 microns dry, 88-132 microns wet
Coverage: 11.40m²/litre at 50 microns d.f.t and stated volume solids
457 sq.ft/ US gallon at 2 mils d.f.t and stated volume solids.
Volume Solids 57%
Packaging: 5 Litre containers.
Colours Available: White
Gloss Level High-Gloss
Method of Application Airless Spray, Air Spray, Brush, Roller
Drying Times:
Temperature Touch Dry Hard Dry Minimum Maximum
5°C (41°F) 5 hours 24 hours 24 hours Extended¹
15°C (59°F) 150 minutes 10 hours 10 hours Extended¹
25°C (77°F) 90 minutes 6 hours 6 hours Extended¹
40°C (104°F) 60 minutes 3 hours 3 hours Extended¹
Interthane 990 Product Data Sheet
Carriage for this product is calculated by weight and is shown in the checkout area.
For further information, please call us on 02476 422200.
All orders are usually despatched within 24 hours of receiving cleared payment (Mon–Fri).
The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control.
Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.