Interthane 870 - Topcoat
Interthane 870 Topcoat
Interthane 870 polyurethane topcoat for structural steelwork
A two component, high build, acrylic polyurethane finish giving excellent durability and long term recoatability.
Typical thickness: 75-125 microns dry, 134-223 microns wet
Coverage: 4.50m²/litre at 125 microns d.f.t and stated volume solids
180 sq.ft/ US gallon at 5 mils d.f.t and stated volume solids.
Volume Solids: 56%
Packaging: 20 Litre containers.
Colours Available: White
Gloss Level: High-Gloss
Method of Application: Airless Spray, Air Spray, Brush, Roller
Drying Times:
Temperature Touch Dry Hard Dry Minimum Maximum
5°C (41°F) 90 minutes 30 hours 30 hours Extended¹
15°C (59°F) 75 minutes 16 hours 16 hours Extended¹
25°C (77°F) 60 minutes 5 hours 5 hours Extended¹
40°C (104°F) 45 minutes 2.5 hours 2.5 hours Extended¹
Interthane 870 Primer Product Data Sheet
All orders are usually despatched within 24 hours of receiving cleared payment (Mon–Fri).
The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control.
Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.