Intergard 269 Primer

Intergard 269 primer, Epoxy for structural steelwork

Intergard 269 is a fast drying two component epoxy primer that can withstand prolonged periods of weathering prior to overcoating. It can be used as a blast holding primer in immersed and exposed conditions and as a tie coat on zinc silicate to prevent zinc salt formation on weathering and pinholing of subsequent high build topcoats.

Typical thickness:                 40 microns dry, 85 microns wet
Coverage:                              11.80m²/litre at 40 microns d.f.t and stated volume solids
                                                3471 sq.ft/ US gallon at 3 mils d.f.t and stated volume solids.
Volume Solids                        47%
Packaging:                             20 Litre containers.
Colours Available:                 red oxide
Gloss Level                            Matt
Method of Application          Airless Spray, Air Spray, Brush, Roller
                                                        

Product Data Sheet

For further information, please call us on 02476 422200.

All orders are usually despatched within 24 hours of receiving cleared payment (Mon–Fri).

The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control. 

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.