Intergard 251 Primer

Intergard 251 primer, Epoxy for structural steelwork

A two component epoxy anti-corrosive primer pigmented with zinc phosphate.

Typical thickness:                 50-75 microns dry, 79-119 microns wet
Coverage:                               8.40m²/litre at 75 microns d.f.t and stated volume solids
                                                337 sq.ft/ US gallon at 3 mils d.f.t and stated volume solids.
Volume Solids                        63%
Packaging:                             20 Litre containers.
Colours Available:                 Buff, Grey, Red Oxide
Gloss Level                            Matt
Method of Application          Airless Spray, Air Spray, Brush, Roller
                                                      

Product Data Sheet

All orders are usually despatched within 24 hours of receiving cleared payment (Mon–Fri).

The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control. 

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.