ME902 is a spray applied polymer solution for use with illbruck butyl and bitumen tapes and membranes.

Usage/purpose

ME902 Butyl & Bitumen Spray Primer serves as a bonding agent and primer for the application of illbruck membranes incorporating butyl and bitumen adhesives.

Protect adjacent areas (and polyurethane foams) with masking tape or otherwise protect them from spray mist. Paints, varnishes and plastics can be dissolved. Compatibility with adjacent materials must be tested.

Safety data sheet must be read and understood before use.

• Easy spray application.
• Increases final bond strength
• Improves adhesion of illbruck membranes
• Short drying time
  
  

Made to Order

Lead Time : 21
Minimum Order Quantity : 120

Data Sheets

Technical Data Sheet
Safety Data Sheet




The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control. 

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.