AW405 consists of a polyethylene film with a rubber adhesive.

Usage/purpose

AW405 Frame Protection Tape is a self-adhesive tape suitable for the protection of sensitive surfaces against dirt and damage during processing, transport, storage and installation. Typical substrates suitable for protection include painted metal (PVDF, polyester), plastic sheets (PVC, PC, melamine). It is particularly suitable for protecting window and door frames. The film must be removed and potentially replaced at a maximum 6 months following application due to potential UV degradation causing difficult removal and potential damage to the frame.

The above data and recommendations are given in good faith, on the basis of practical experience, but without warranty.

The customer should carry out their own tests to confirm the suitability of the product for the application under consideration. Above technical data subject to tolerances up to 15%.

Safety data sheet must be read and understood before use.


Product Benefits

• Protects sensitive surfaces from dirt, scratching, spillage
• Easy application
• Easy removal
• 6 months UV resistance
• Thick film for added protection
  
  

Data Sheets

Technical Data Sheet

The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control. 

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.