60mm backset - ARRONE mortice deadlock case:

Function: Deadbolt operation

Forend/strike material: Stainless steel

Forend type: Double

CE Marked: AG0088, UKCA Marked: AG7671

- BS EN 12209: 3 | M | 8 | 1* | 0 | G | 3 | B | C | 0 | 0

Certifire approved: CF5022, CE DOP: HUK0031, UKCA DOP: HUK0031-UK

Testing: BS EN 1634-1. Assessed for use on 30, 60, 90 and 120 minute timber fire doors and 240 minutes steel fire doors.

* The AR912 series lock case has been successfully fire tested with the use of an intumescent kit. The supply and fitting of this intumescent kit is essential to the products compliance with the fire test and CE marking evidence it has gained. HOPPE takes no responsibility for any locks purchased and fitted without sufficient intumescent protection.

Finish: F69 satin stainless steel

Face plate finish: F69 satin stainless steel

Keyhole: Euro profile cylinder

Keyhole distance: 72 mm

Shape: square

Backset: 60 mm, pierced for escutcheons at 38 mm centres

Corner: square corner

Case size: Depth: 88 mm length: 165 mm width: 16 mm, modular

 
Product Data Sheet Links

Model: AR8102

Item number: 87134371

Reference number: AR8102-S-60-SSS

The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control. 

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.