76mm Square Case Mortice Latch (Two Way Action)

ARRONE mortice latch:

Function: Latchbolt operation

Forend/strike material: Stainless steel

Forend type: Double

CE Marked: AG0178, UKCA Marked: AG7657

- BS EN 12209: 2 | H | 8 | 1* | 0 | F | - | B | 0 | NPD | 0

Certifire approved: CF5768, CE DOP: HUK0043, UKCA DOP: HUK0043-UK

Testing: BS EN 1634-1. Assessed for use on up to 60 minute timber fire doors.

* The AR8009 series latch has been successfully fire tested with the use of an intumescent kit. The supply and fitting of this intumescent kit is essential to the products compliance with the fire test and CE marking evidence it has gained. HOPPE takes no responsibility for any locks purchased and fitted without sufficient intumescent protection.

Face plate finish: F69 satin stainless steel

Shape: square

Backset: 57 mm, pierced for furniture at 38 mm centres

Case size: Depth: 77 mm length: 58 mm width: 15 mm

Two way lightly sprung action is suitable for most light sprung levers or sprung / unsprung knobs.

Case pierced to accept bolt through furniture at 38mm horizontal centres.

Not suitable for unsprung lever furniture.

Product Data Sheet Links

The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control. 

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.