ARRONE overhead door closing device:
Power size: 2 to 4 adjustable by spring tension
Function: Closing, latching, backcheck
Cover: Designer cover
Maximum door width: 1,100 mm
Maximum door weight: 80 kg
Arm application: Fig 1, Fig 6 and Fig 61 fixing positions
Successfully type tested for conformity to all the requirements of BS EN 1154:1997
- Door mount pull (Fig 1), door mount push (Fig 6), transom mount pull (Fig 61): 3 | 8 | 4/2 | 1* | 1 | 4
Included in a successful fire test to BS EN 1634 Part 1. Assessed for use on 30, 60 and 120 minutes timber fire doors and 240 minutes on steel fire doors.
CE Marked: AD0009, UKCA Marked: AD7695
Certifire approved: CF294, CE DOP: HUK0019, UKCA Marked: HUK0019-UK
The AR3500 can satisfy the opening force recommendations of BS 8300 and ADM when fitted in Fig 1 to a door with minimum width of 938 mm according to third party data. However other installed hardware, door seals and differential air pressure will affect the products as fitted performance meaning that the door closer alone cannot allow compliance to BS 8300 and ADM.
Cover finish: gold
Maximum door width: 1100 mm
Shape: Designer
Power size: 2 to 4
Mechanism function: Backcheck, delayed action, spring adjustment, closing/latching speed
Maximum door weight: 80 kg
Mechanism type: Rack & pinion
Door type: wooden door
Arm finish: gold
Fixings: Timber door
Arm application: figure 1, 6 and 61
Mechanism dimensions and fixing centres: 248x45x53.5 mm; centres 225x20 mm
Opening Angle: max. 105° opening
Arm type: Scissor arm, detachable joint, flat form, adjustable
Product Data Sheet Links
The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control.
Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.