Satin ARRONE - 60mm backset mortice latch case:

Function: Latch bolt operation

Forend/strike material: Stainless steel

Forend type: Double

CE Marked: AG0087, UKCA Marked: AG7670

- BS EN 12209: 3 | M | 8 | 1* | 0 | G | - | B | 0 | 2 | 0

Certifire approved: CF5022; CE DOP: HUK0032, UKCA DOP: HUK0032-UK

Testing: BS EN 1634-1. Assessed for use on 30, 60, 90 and 120 minute timber fire doors and 240 minutes steel fire doors.

Meets dimensional recommendations of BS 8300 and ADM for locks

* The AR8101 series lock case has been successfully fire tested with the use of an intumescent kit. The supply and fitting of this intumescent kit is essential to the products compliance with the fire test and CE marking evidence it has gained. HOPPE takes no responsibility for any locks purchased and fitted without sufficient intumescent protection.

Finish: F69 satin stainless steel

Face plate finish: F69 satin stainless steel

Shape: square

Backset: 60 mm, pierced for furniture at 38 mm centres

Corner: square corner

Case size: Depth: 88 mm length: 165 mm width: 16 mm, modular

Product Data Sheet Links

Model: AR8101

Item number: 87134329

Reference number: AR8101-S-60-SSS

The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control. 

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.