NS Putty Pads are a pre-cut ablative pads designed for easy application around single and double electrical sockets where fire resistance must be upheld in the event of a fire. EN 1366-3 EN 13501-2
Intended Areas of Use
To reinstate fire resistance through walls
Where single and/or double plastic socket back boxes require Fire Resistance
Where single and/or double plastic socket back boxes require improved acoustic performance
Where single and/or double non-combustible metallic socket back boxes require improved acoustic performance
Benefits
No cure time required
Contributes to Green Building
Non-setting material
Dry fit system
Halogen free, resists fungi and vermin
Offers a cold smoke seal
High tack adhesion, pliable and mouldable with excellent self bonding properties
The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control.
Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.
Brand:
FSI Ltd
weight:
400.0
Product Condition:
New
Updating Order Details
Please do not refresh or navigate away from the page!
Related Products
FSI Pyrocoustic Intumes..
Pyrocoustic Sealant is a water based acrylic sealant used to reinstate the fire resistance of wall and floor constructions where apertures are penetrated by multiple services and linear gap seals where...
Small Fire Pillow Small Fire Pillow 330 x 200 x 25mm FSI Fire Pillows are an ideal product to create a temporary or permanent fire barrier around all types of services to prevent the passage of fire through...
Fire Resistant Pipe Collar PipeBloc PCP Pipe Collars are an intumescent composite based on graphite intumescent and designed to provide a high volume expansion and pressure seal. The PipeBloc PCP Achieved...
Stopseal 50mm Batt is a coated stone wool board used to reinstate the fire resistance performance of flexible & rigid wall and rigid floor constructions where apertures are penetrated by single or multiple...
PipeBloc EL is designed and tested to seal service penetration apertures containing plastic and metallic pipes both with and without insulation. PipeBloc EL is formulated with thermoplastic composites...