FJ203 Fire Resistant Rope
FJ203 is used for sealing horizontal and vertical linear joints with or without movement capability between fire resistant separating rigid walls and floors. FJ203 can be combined with sealants such as Nullifire FS702 or FS703 Fire Rated Acrylic or Silicone Mastic.
Benefits
- Up to 4 hours fire resistance - Tested to EN 1366-4
- Resistance to fire for joints in between rigid walls or floors
- Compensates irregularities in width of a joints
- 20% expansion capability (tested during fire test)
- Fast and easy to cut
- Non combustible
Colour Grey
Nominal Joint Width |
FJ203 Roll Length |
10mm |
15mm x 50m Roll (non stock item) |
11-14mm |
20mm x 50m Roll |
15-20mm |
30mm x 50m Roll |
21-25mm |
40mm x 50m Roll |
26-30mm |
50mm x 25m Roll |
31-40mm |
60mm x 25m Roll |
41-50mm |
70mm x 20m Roll (non stock item) |
Product Data SheetsFJ203 Technical Data SheetFJ203 Safety Data Sheet
The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control.
Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.