Firetherm Intuspan Intumescent Joint Filler 87x50mm
Size 87x50mm
Intuspan is a very pliable joint filler, black in colour and factory applied with a revolutionary 102 times volume expansion intumescent compound.
A sandwich of intumescent board, consisting of a modified rubber base filled with graphite and combustion modified foam. Provides a high level of movement suitable for gaps up to 100 mm. Provides 2 hour protection. No adhesive required.
Benefits
- Can accommodate regular cycles of high or low amplitude movement
- Unaffected by moisture
- Easy to install using finger pressure even in uneven gaps
- A dry system
- For vertical or horizontal wall applications
Sizes: 87mm x 50mm x 1mColour: BlackProduct Data Sheets
Product Data Sheet
Safety Data Sheet
Please note, Linear Gap Seal is often project specific and as such it would be sensible to call us on 02476 422200 to check availability and lead time.
All orders are usually despatched within 24 hours of receiving cleared payment (Mon–Fri).
The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control.
Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.