FIREFLY Ablative Coating is a fire-rated water-based polymer in brushable form, used to reseal and restore the fire performance of an ablative batt after cutting or any minor surface damage sustained during installation.
Use Areas
Suitable for use as part of the FIREFLY FB180 Ablative Batt system.
Brushed on to edges exposed after cutting the ablative coated batt.
Restoration of coating after minor surface damage or cracks sustained during installation.
Not suitable for use on flexible fire barriers.
Key Benefits
- Tested for use with the FIREFLY
- FB180 Batt to maintain the fire performance integrity of the installed system
- Easily applied, brushable liquid
- Reseals and restores the ablative performance of the coated
- batt when applied to cuts, cracks or minor surface damage
- during installation
- Tested to BS EN 1364-2:2015
- Quick drying and paintable
- Ready to use in a resealable 5L tub
Testing
Tested to various BS EN 1364 and BS EN 1366 Fire Resistance Standards
Application
Brush-grade liquid for use with FIREFLY® FB180 Ablative Batt
Brushed liquid coating to reseal cuts, cracks and minor surface damage during installation
Finish
Colour: White
Tack Free Time: Approx 60 mins dependent on temperature and humidity
Drying Time: <8 hours – 2mm thick, 65% RH, 20C
Coverage
10m2 / 5L
Packaging
5L resealable tub. Shelf life 12 months from manufacture
Application Data
Application Temperature: between 5C – 40C
Cleaning: Water
Specific Gravity: 1.35 – 1.45
pH: 7.7 – 8.5
Limitations
Not suitable for use with cPVC pipes or flexible fire barriers
The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control.
Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.