FIREFLY FB180 Ablative Batt – 60mm Wall System provides a single layer EI60:E90 fire-rated compartmentation wall that can be installed free-standing or within timber or plasterboard applications.

USE AREAS
The FIREFLY FB180 Ablative Batt Wall System can be installed as a non-load bearing compartmentation wall into restricted areas such as lofts and roof voids

It can be friction-fitted into typical existing supporting timber frames and also used within a double layer plasterboard wall

In all instances, whether free-standing or working with existing timber/plasterboard structures, the FB180 60mm Batt Wall System provides an upgraded 90 minutes Integrity & 60 minutes Insulation

PENETRATIONS
FIREFLY FB180 Ablative Batt Wall System is tested with expected penetrations including the FIREFLY Access Panel. See Installation Drawings/Manual for full details.

A complementary FIREFLY FB180 Ablative Batt 60mm Floor System is also available

• Single layer 60mm batt installation provides 90 minutes Integrity & 60 minutes Insulation
  
• Fully tested to BS EN 1364-1 2015 and BS EN 1366-3:2021 to also include penetrations and access panels
  
• Can be used to create a stand-alone non-load bearing wall, built from one side in restricted access areas to create compartmentations
  
• Tested for use with timber where it can be friction fitted between standard (min. 90 x 38mm C16 softwood) studs/joists which must be treated with FIREFLY Ablative Coating
  
• Also tested for use between 2 layers of plasterboard to increase fire-rating of standard construction to EI60:E90
   
• Suitable and tested for use in conjunction with FIREFLY flexible barriers and FIREFLY FR120 Access Panel
   
• Ease of installation with standard batt tools and friction fitting – additional tracking not required to be used – and FIREFLY fixings and Acrylic Sealant also available as part of the tested system
  
• Acoustic reduction of 27dB from batt in isolation
  
• Fully supported with detailed drawings and installation instructions available online to clarify areas such as handling specific penetrations
  
• Meets requirements of BS EN 1364-1:2015 and provides a tested & certified solution as part of a FIREFLY system

Product Data Sheet Links
Data Sheet
Safety Data Sheet (MSDS)
Install Guide - Batt Wall
Firefly Product - Summary
Ancillaries & Fixings

The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control. 

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.