AED
AFN
ALL
AMD
ANG
AOA
ARS
AUD
AWG
AZN
BAM
BBD
BDT
BGN
BHD
BIF
BMD
BND
BOB
BRL
BSD
BTN
BWP
BYN
BYR
BZD
CAD
CDF
CHF
CLF
CLP
CNH
CNY
COP
CRC
CUC
CUP
CVE
CZK
DJF
DKK
DOP
DZD
EGP
ERN
ETB
EUR
FJD
FKP
GEL
GGP
GHS
GIP
GMD
GNF
GTQ
GYD
HKD
HNL
HRK
HTG
HUF
IDR
ILS
IMP
INR
IQD
IRR
ISK
JEP
JMD
JOD
JPY
KES
KGS
KHR
KMF
KPW
KRW
KWD
KYD
KZT
LAK
LBP
LKR
LRD
LSL
LYD
MAD
MDL
MGA
MKD
MMK
MNT
MOP
MRO
MRU
MUR
MVR
MWK
MXN
MYR
MZN
NAD
NGN
NIO
NOK
NPR
NZD
OMR
PAB
PEN
PGK
PHP
PKR
PLN
PYG
QAR
RON
RSD
RUB
RWF
SAR
SBD
SCR
SDG
SEK
SGD
SHP
SLL
SOS
SRD
SSP
STD
STN
SVC
SYP
SZL
THB
TJS
TMT
TND
TOP
TRY
TTD
TWD
TZS
UAH
UGX
USD
UYU
UZS
VES
VND
VUV
WST
XAF
XCD
XOF
XPF
YER
ZAR
ZMW
ZWL
Carboline Thermaline 550 Black - 10L Kit
Carboline Thermaline 550 Black - 10L Kit
Thermaline 550 A high performance product which has excellent resistance to dry cycling conditions at elevated temperatures. Used to protect steel substrates for atmospheric exposure and under thermal insulation.
Product Features
- Elevated temperature resistant.
- Very good flexibility.
- Easily applied by spray.
- Can be applied over steel and stainless steels.
- Qualified by EDF (Electricité de France) - FNP Register N° 1110.
- Can be applied over Carbozinc 11.
| Color | Black Grey is standard Available in a limited number of colors upon request: Contact Technical Service Department for information. Coating’s discoloration can be expected when exposed to elevated temperatures. This discoloration does not affect performance. |
| Finish | Semi-Gloss |
| Primer | Self-priming. On prepared Steel and Stainless Steel. May be applied over cured inorganic zinc primers, after MEK test. A mist coat may be required to minimize bubbling over inorganic zinc primers. |
| Dry Film Thickness | 75 to 125µm per coat. Dry film thickness above 200 µm per coat is not recommended. Over inorganic zinc, after MEK test, do not exceed 100µm DFT. |
| Solids Content | By volume: 55% ± 2% |
| Theoretical Coverage Rate |
7.3 sq.m./l at 75 micron DFT. 4,6 sq.m./l at 120 micron DFT Mixing and application losses will vary and must be taken into consideration when estimating job requirements. |
| Dry Temp. Resistance | Continuous: 225°C (437°F) |
| Limitations | Not Recommended for strong mineral and organic acids. Yellowing occurs when the operating temperature reaches 200 °C, without compromising product performance. |
Data Sheets
Thermaline 550 PDS
Thermaline 550 MSDS Part A
Thermaline 550 MSDS Part B
The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control.
Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.
