AED
AFN
ALL
AMD
ANG
AOA
ARS
AUD
AWG
AZN
BAM
BBD
BDT
BGN
BHD
BIF
BMD
BND
BOB
BRL
BSD
BTN
BWP
BYN
BYR
BZD
CAD
CDF
CHF
CLF
CLP
CNH
CNY
COP
CRC
CUC
CUP
CVE
CZK
DJF
DKK
DOP
DZD
EGP
ERN
ETB
EUR
FJD
FKP
GEL
GGP
GHS
GIP
GMD
GNF
GTQ
GYD
HKD
HNL
HRK
HTG
HUF
IDR
ILS
IMP
INR
IQD
IRR
ISK
JEP
JMD
JOD
JPY
KES
KGS
KHR
KMF
KPW
KRW
KWD
KYD
KZT
LAK
LBP
LKR
LRD
LSL
LYD
MAD
MDL
MGA
MKD
MMK
MNT
MOP
MRO
MRU
MUR
MVR
MWK
MXN
MYR
MZN
NAD
NGN
NIO
NOK
NPR
NZD
OMR
PAB
PEN
PGK
PHP
PKR
PLN
PYG
QAR
RON
RSD
RUB
RWF
SAR
SBD
SCR
SDG
SEK
SGD
SHP
SLL
SOS
SRD
SSP
STD
STN
SVC
SYP
SZL
THB
TJS
TMT
TND
TOP
TRY
TTD
TWD
TZS
UAH
UGX
USD
UYU
UZS
VES
VND
VUV
WST
XAF
XCD
XOF
XPF
YER
ZAR
ZMW
ZWL
Carboline Thermaline 4700 Aluminium - 4L
Carboline Thermaline 4700 Aluminium - 4L
Thermaline 4700 High-performance finish for areas exposed to extreme temperatures. Suitable for service from 400°F-1000°F (204°C-538°C) Color stability at maximum temperature will depend on color selected. Requires heat curing.
Product Features
- Resistant to severe thermal shock
- Provides outstanding long-term performance when applied over Carbozinc inorganic zinc primers
- Air-dries to touch (full film formation properties occurs after heat curing)
| Color | Aluminum only (C901). The alignment of aluminum flakes in aluminum-filled finishes is very dependent on application conditions and techniques. Care must be taken to keep conditions as constant as possible to reduce variations in final appearance. It is also advisable to work from a single batch of material since variations can occur from batch to batch. For more information consult Carboline Technical Service Department. |
| Finish | Gloss |
| Primer | Inorganic zincs. None needed for stainless steel or aluminum. |
| Dry Film Thickness | 38 - 51 microns (1.5 - 2 mils) per coat Do not exceed 2.0 mils in a single coat. Two coats are recommended over stainless steel and one or two coats over inorganic zincs. |
| Solids Content | By Volume 30% +/- 2% |
| Theoretical Coverage Rate |
11.8 m²/l at 25 microns (481 ft²/gal at 1.0 mils) 7.9 m²/l at 38 microns (321 ft²/gal at 1.5 mils) 5.9 m²/l at 50 microns (241 ft²/gal at 2.0 mils) Allow for loss in mixing and application. |
| VOC Value(s) | As Supplied : 5.04 lbs./gal (604 g/l) Thinner 10 : 16 oz/gal: 5.27 lbs/gal (632 g/l) Thinner 235 : 12 oz/gal: 4.1 lbs/gal (492 g/l) |
| Dry Temp. Resistance | Continuous: 538°C (1000°F) Non-Continuous: 649°C (1200°F) |
| Limitations | • Do not use for immersion service. • Do not exceed thickness recommendation. • Excessive film thickness may result in blistering and delamination when the temperature is increased |
| Topcoats | Not Applicable |
Data Sheets
Thermaline 4700 Aluminium PDS
The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control.
Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.
