AED
AFN
ALL
AMD
ANG
AOA
ARS
AUD
AWG
AZN
BAM
BBD
BDT
BGN
BHD
BIF
BMD
BND
BOB
BRL
BSD
BTN
BWP
BYN
BYR
BZD
CAD
CDF
CHF
CLF
CLP
CNH
CNY
COP
CRC
CUC
CUP
CVE
CZK
DJF
DKK
DOP
DZD
EGP
ERN
ETB
EUR
FJD
FKP
GEL
GGP
GHS
GIP
GMD
GNF
GTQ
GYD
HKD
HNL
HRK
HTG
HUF
IDR
ILS
IMP
INR
IQD
IRR
ISK
JEP
JMD
JOD
JPY
KES
KGS
KHR
KMF
KPW
KRW
KWD
KYD
KZT
LAK
LBP
LKR
LRD
LSL
LYD
MAD
MDL
MGA
MKD
MMK
MNT
MOP
MRO
MRU
MUR
MVR
MWK
MXN
MYR
MZN
NAD
NGN
NIO
NOK
NPR
NZD
OMR
PAB
PEN
PGK
PHP
PKR
PLN
PYG
QAR
RON
RSD
RUB
RWF
SAR
SBD
SCR
SDG
SEK
SGD
SHP
SLL
SOS
SRD
SSP
STD
STN
SVC
SYP
SZL
THB
TJS
TMT
TND
TOP
TRY
TTD
TWD
TZS
UAH
UGX
USD
UYU
UZS
VES
VND
VUV
WST
XAF
XCD
XOF
XPF
YER
ZAR
ZMW
ZWL
Carboline Phenoline 353 LT 10L Kit
Carboline Phenoline 353 LT 10L Kit
Phenoline 353 LT is a highly cross-linked epoxy lining with extraordinary overall chemical resistance and versatility. It has a unique blend of resins that make it highly resistant to a variety of aggressive cargos like ethanol, gasolines, gasoline blends, biodiesel, fuel oils, and others. It can be used is both acidic and high temperature caustic exposures. Markets served are terminals, refineries, petrochemical, wastewater, railcar linings, and many others. This low temperature cure formulation allows application and curing down to 2°C (35°F).
Product Features
- Outstanding overall chemical resistance
- Dense, highly cross-linked film for superior barrier protection
- Excellent abrasion resistance and toughness
- Well-suited for hydrocarbon exposures
- Cures down to 35°F (2°C)
- Meets NORSOK System 7C Requirements for subsea equipment up to 180°C (356°F)
- Certified for UNE 48307 - Type I, classes I, IIA, IIB, IIA & IV
| Color | Red-brown (0500), Gray (0700), White (0800) |
| Finish | Gloss |
| Dry Film Thickness | 127 - 178 microns (5 - 7 mils) per coat Two coats are generally recommended to 10-14 mils (254-356 microns) total DFT. Total thickness not to exceed 18 mils (457 microns). |
| Solids Content | By Volume 76% +/- 2% |
| HAPs Values | As supplied: 1.35 lbs/solid gallon These are nominal values and may vary by color. |
| Theoretical Coverage Rate |
29.9 m²/l at 25 microns (1219 ft²/gal at 1.0 mils) 6.0 m²/l at 125 microns (244 ft²/gal at 5.0 mils) 4.3 m²/l at 175 microns (174 ft²/gal at 7.0 mils) Allow for loss in mixing and application. |
| VOC Value(s) | As Supplied : 1.60 lbs/gal (197 g/l) These are nominal values and may vary slightly with color. |
| Dry Temp. Resistance | Continuous: 121°C (250°F) Non-Continuous: 149°C (300°F) Discoloration and loss of gloss is observed above 200°F (93°C). |
| Limitations | Linings exposed to cargos warmer than the outside steel temperature are subject to a “cold-wall” effect. The smaller the temperature differential the less negative effect on performance. Epoxies lose gloss, discolor and eventually chalk in sunlight exposure. |
Data Sheets
Phenoline 353 LT PDS
Phenoline 353 LT MSDS Part A
Phenoline 353 LT MSDS Part B
The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control.
Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.
