Carboline carbomastic 18 FC 20L Kit

carbomastic-18-fc-20l
£351.20 inc. tax

£292.67 ex. tax
? Tax based on United Kingdom.
Color*
Carboline carbomastic 18 FC 20L Kit Summary

Carboline carbomastic 18 FC 20L Kit

This epoxy is a fast-curing, heavy-duty, high-build anti-corrosive coating with a broad range of uses in marine and other corrosive environments. It is an excellent choice for the protection of ship hull exteriors, above and below the water line, ballast tanks, etc. Offshore applications include splash zones, subsea, jackets, production decks, drilling rig legs and pontoons in immersed exposures.


Product Features

• Excellent immersion performance in both fresh and sea water
• Suitable as a rust preventive coating in ballast tanks and hull applications
• Ideal for sub-sea installations, jackets and other areas exposed to sea water
• Can be applied as low as 5°C (40°F)
• Good flexibility
• Very good abrasion resistance
• Good flexibility
• High solids; low VOC

Color 1702 (Off White) is standard
Finish Semi-Gloss
Primer Self-priming
Dry Film Thickness 5 - 20 mils (127 - 508 microns) per coat

Normally applied in 175 microns (7 mil) thicknesses. May be applied up to 500 microns (20 mils) in one or more coats depending on application.
Solids Content By Volume 85% +/- 2%
Theoretical Coverage Rate 1363 ft²/gal at 1.0 mils (33.5 m²/l at 25 microns)
273 ft²/gal at 5.0 mils (6.7 m²/l at 125 microns)
68 ft²/gal at 20.0 mils (1.7 m²/l at 500 microns)
Allow for loss in mixing and application.
VOC Values As Supplied : 120 g/l (1 lbs/gal)
These are nominal values.
Dry Temp. Resistance Continuous: 250°F (121°C)
Non-Continuous: 300°F (149°C)

Epoxies discolor (darken) when exposed to elevated temperatures.
Approvals • Det Norske Veritas, Standard Testing Classification of Ballast Tank Coatings, rev. 4/2 *
• IMO Performance Standard for Protective Coatings. *
• DNV Type Approval Certificate *
• NORSOK M-501 System no. 7 Submerged
• NS 5417-1998 Norwegian waterpower

• For product manufactured by Carboline Norge AS
Limitations Epoxies lose gloss, discolor and eventually chalk in sunlight exposure. Not recommended for immersion in aromatic or ketone solvents or strong oxidizing acids.
Topcoats Normally not topcoated for immersion service, otherwise topcoat according to Carboline recommendations.




Data Sheets

carbomastic 18 FC PDS




The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control. 

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.

Brand:
Carboline
weight:
1000.0
Product Condition:
New
Updating Order Details
Please do not refresh or navigate away from the page!
Product Added to your Cart
x

-------- OR --------