Carboline Carboguard 890 LT RAL 7035 5L Kit

carboguard-890-lt-ral-7035-5l
£93.56 inc. tax

£77.97 ex. tax
? Tax based on United Kingdom.
Carboline Carboguard 890 LT RAL 7035 5L Kit Summary

Carboline Carboguard 890 LT RAL 7035 5L Kit

Highly chemical resistant epoxy mastic coating with exceptionally versatile uses in all industrial markets. Self-priming and suitable for application over most existing coatings, and tightly adherent to rust. Excellent for use as a primer or intermediate coat where low temperature cure is needed. Can be used in a variety of chemical environments. May be used as a self-priming or finish coat on exterior exposure if discoloration can be tolerated.


Product Features

• Excellent chemical resistance
• Surface tolerant characteristics
• Low-temperature cure formulation
• Self-priming capability
• Very good abrasion resistance
• VOC compliant to current AIM regulations
• Suitable for use in USDA inspected facilities

Color C900 (Black), S800 (White), C703 (Grey), C705 (Light Grey), 0500 (Tile Red), 5555 (Safety Red), 0200 (Tan), 6666 (Safety Yellow), 1675 (Ignition Yellow)
Other colors may be available on request. Contact your Carboline Representative for availability.
Finish Gloss
Primer Self-priming. May be applied over inorganic zinc primers and other tightly adhering coatings. A mist coat may be required to minimize bubbling over inorganic zinc primers.
Dry Film Thickness 4 - 6 mils (102 - 152 microns) per coat

Use 6-8 mils (152-203 microns) over tight rust or severe environments. Do not exceed 10 mils (250 microns) in a single coat. Excessive film thickness over inorganic zincs may increase damage during shipping or erection.
Solids Content By Volume 80% +/- 2%
Theoretical Coverage Rate 1283 ft²/gal at 1.0 mils (31.5 m²/l at 25 microns)
321 ft²/gal at 4.0 mils (7.9 m²/l at 100 microns)
214 ft²/gal at 6.0 mils (5.2 m²/l at 150 microns)
Allow for loss in mixing and application.
VOC Values As Supplied : 1.5 lbs/gal (180 g/l)
Thinner 33 : 14 oz/gal=2.0 lbs/gal (250 g/l)
Thinner 2 : 15 oz/gal=2.0lbs/gal (250 g/l)

These are nominal values and may vary slightly with color.
Limitations Epoxies may lose gloss, discolor and chalk when exposed to sunlight.
Do not apply over latex coatings. Not recommended for immersion projects. Do not use as a finish coat if severe discoloration is objectionable.
Topcoats May be coated with Acrylics, Epoxies, or Polyurethanes depending on exposure and need.




Data Sheets

Carboguard 890 LT PDS

Carboguard 890 LT SDS Part B
Carboguard 890 LT(Carboguard 890) SDS Part A



The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control. 

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.

Brand:
Carboline
weight:
1000.0
Product Condition:
New
Updating Order Details
Please do not refresh or navigate away from the page!
Product Added to your Cart
x

-------- OR --------