Carboline Carboguard 690 GF RAL 7035 5L KIT

carboguard-690-gf-5l
£107.35 inc. tax

£89.46 ex. tax
? Tax based on United Kingdom.
Carboline Carboguard 690 GF RAL 7035 5L KIT Summary

Carboline Carboguard 690 GF RAL 7035 5L KIT

High performance, glass-flake filled, cold cure epoxy having excellent film strength and resistance to water, salt water and wastewater exposures. This coating exhibits outstanding moisture tolerance during application, low temperature cure capability, and very fast cure response for quick return to service. Glass flake reinforcement enhances film strength, impact resistance and barrier properties. Can be used on a variety of surfaces including structural steel, piping, pilings, ships, offshore structures and other equipment exposed to industrial or marine environments. It can also be used in immersion service for salt water, process water (non-potable) and waste water treatment projects.


Product Features

• High solids, low VOC
• High build (20+ mils)
• Low temperature cure (20°F)
• Excellent moisture tolerance during application
• Continues to cure underwate
• Fast cure response
• Excellent physical and barrier properties

Color S800 (White), C705 (Light Grey) Other colors may be available on request. Contact your Carboline Representative for availability.
Finish Semi-Gloss
Primer Self-Priming or epoxies
Dry Film Thickness Can be applied up to 20 mils (400 microns) in a single coat- see Limitations section. Consult Technical Service for thicker films.
Solids Content By Volume 82% +/- 2%
Theoretical Coverage Rate 1315 ft²/gal at 1.0 mils (32.3 m²/l at 25 microns)
132 ft²/gal at 10.0 mils (3.2 m²/l at 250 microns)
88 ft²/gal at 15.0 mils (2.2 m²/l at 375 microns)
Allow for loss in mixing and application.
Severe Exposures Under Insulation temperature resistance:
Continuous: 300°F (149°C)
Non-Continuous: 350°F (177°C)
Discoloration occurs above 200°F (93°C) but does not affect performance.
VOC Values As Supplied : 1.3 lbs/gal (155 g/l) mixed
Thinner 2 : 16 oz/gal 2.06 lbs/gal (248 g/l)

These are nominal values and may vary with color.
Dry Temp. Resistance Continuous: 300°F (149°C)
Non-Continuous: 350°F (177°C)

Discoloration occurs above 200°F (93°C) but does not affect performance.
Limitations • Epoxies may lose gloss, discolor and chalk when exposed to sunlight.
• Discoloration is more pronounced with this product.
• For immersion projects use only factory made material in special colors.
• This product has the ability to be applied over damp or even wet substrates. Remove excess water by blowing down the surface and apply in multiple coats to achieve desired film thickness.
• Brush or roller, and multiple coats are preferred over wet substrates.




Data Sheets

Carboguard 690 GF PDS

Carboguard 690 GF SDS Part A
Carboguard 690 GF SDS Part B
Carboguard 690 Product Flyer



The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control. 

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.

Brand:
Carboline
weight:
1000.0
Product Condition:
New
Updating Order Details
Please do not refresh or navigate away from the page!
Product Added to your Cart
x

-------- OR --------