FO100 Putty Pads are an easy to apply fire and sound rated seal supplied as a non-setting putty. The pad is hand workable, re-useable and re-serviceable due to its non-setting properties.

When electrical sockets and switches are installed in dry lining partitions, the original fire rating of the partition is compromised. Fitting Nullifire FO100 Putty Pads will reinstate the fire rating of the partition for up to two hours (depending on the partition fire rating and design). They will also prevent the passage of smoke and flames in a fire, as well as sound and air movement during service life, through the electrical socket, into the cavity.

Nullifire FO100 Putty Pads are shaped for use on both single and double electrical socket installations in dry lining walls. The pads are supplied in a cross shape for internal installation in a socket.

 

Benefits

• Tested to EN 1366-3:2009, 120 minutes fire resistance in 100mm and 139mm dry lining
• Sound insulating BS EN ISO 140-3:1995
• Solvent free (no VOC)
• Ready to use – no special tools required
• Cold smoke seal

Product Data Sheet
Data Sheet
Safety Data Sheet
Declaration of Performance


The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control. 

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.