Protecta FR Pipe Wraps

FR-PIPE-WRAP
£1.97 inc. tax

£1.64 ex. tax
? Tax based on United Kingdom.
Product Size*
Protecta FR Pipe Wraps Summary

Protecta FR Pipe Wraps

Protecta FR Pipe Wraps

Protecta FR Pipe Wraps consist of a plastic wrapped graphite based swelling material that reacts with heat for up to 2 hours of fire protection. This then fills the cavities resulting from the melting plastic through-penetration in case of a fire.

It may be used both for plastic pipes (PVC, PP, PE ABS and Alupex), bundles of plastic pipes with or without cables as well as cable bundles. The Pipe Wrap is cast into the wall or the floor by fixing it round the through-penetration with the attached sticker. It may also be fitted in the Protecta FR Board.

Available in the following sizes:
55mm, 82mm, 110mm, 125mm, 160mm, 200mm, 250mm and 315mm

Key Features

  • For plastic pipe sizes from smallest pipes available to Ø400 mm with a wide range of pipe wall thicknesses
  • For metal pipes with continuous combustible pipe insulation
  • For plastic pipes with cables (conduits)
  • Pipe wraps comes in two different types; ready made for most common diameters and in 25 metre rolls for all diameters
  • Fire classifications up to 120 minutes for both integrity and insulation
  • Certified for PVC-U, PVC-C, PE, LDPE, MDPE, HDPE, ABS, SAN+PVC and PP pipes
  • Tested and certified for U/U pipe end applications
  • Classified for fire sealing in all types of constructions
  • Excellent sound insulation
  • No emissions - environmentally and user friendly
  • Simple to install in both Protecta FR Board and Protecta EX Mortar
  • Unlimited storage time (under correct conditions)
  • 30 years working life guarantee

Product Data Sheets:

Pipe Wrap Technical Data Sheet

Pipe Wrap Installation Instructions
Pipe Wrap Safety Data Sheet

Protecta Pipe Wrap - Fire Stopping of plastic pipes in walls



Protecta Pipe Wrap - Fire Stopping of plastic pipes in walls



Protecta FR Wrap in EX Mortar - Fire stopping pipe melting through-penetration within concrete floor




All orders are usually despatched within 24 hours of receiving cleared payment (Mon–Fri).

The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control. 

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.  

Brand:
Protecta
weight:
300.0
Product Condition:
New
Updating Order Details
Please do not refresh or navigate away from the page!
Product Added to your Cart
x

-------- OR --------