• Tested to BSEN 1366-3: 2009
• Classified according to EN 13501-2: 2007 + A1: 2009
• CE Marked
• Up to 4 hour fire rating
• Suitable for PVC, PVC-U, PE, HDPE, MDPE & PP pipes
• Available for 25-160mm pipes
• Can be retrofitted
• Performance unaffected by weathering
• (Type X Durability)
• Compatible with the QuelStop System – QuelStop Fire Batt & QF2 Fire Protection Compound
• Tested for use on concrete and masonry floors & walls
• Tested for use on flexible walls – fire rated partition walls
• Tested on a plasterboard ceiling/timber floor in accordance with the principles of BS EN1366-3:2009

All orders are usually despatched within 24 hours of receiving cleared payment (Mon–Fri).

The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control. 

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.