Nullifire FS702 Intumastic

FS702
RRP £2.06
£2.10 inc. tax

£1.75 ex. tax
? Tax based on United Kingdom.
Product Type*
Nullifire FS702 Intumastic Summary

Nullifire FS702 Intumastic

Nullifire FS702 Intumastic 

Nullifire FS702 Intumastic is a one-part fire resistant acrylic joint sealant. Nullifire FS702 cures to give a firm, but flexible seal in low movement fire rated joints to seal between joints in Nullifire Intubatt FB750 Coated Fire Batts, substrate to penetration service applications and pointing up of penetration seals. Nullifire FS702 Sealant may be used to provide a linear joint or gap seal with specific supporting constructions and substrates and as a penetration seal.

Substrates
• Masonry to masonry
• Masonry to timber
• Masonry to steel
• Nullifire Intubatt FB750 to flexible wall
• Nullifire Intubatt FB750 to rigid wall
• Flexible wall to flexible wall
• Flexible wall to rigid floor
• Rigid floor to rigid floor
• Rigid wall to rigid wall

   

Benefits

  • Can achieve up to 4 hours joint fire resistance
  • Tested in accordance with EN 1366-4, EN1366-3 and BS476 Part 20-22
  • Ideal for sealing low movement joints - suitable for gaps up to 50 mm wide
  • Suitable for rigid and flexible walls
  • Up to 30% movement capability (during a fire test)
  • Used for sealing Nullifire Intubatt FB750 Coated Fire Batts
  • Acoustics up to 55 dB
  • Air seal up to 2000 Pa
  • Single sided seal tested
  • Optifire unique traceability identifier


Product Data Sheet Links

FS702 Technical Data Sheet

FS702 Safety Data Sheet
FS702 Declaration Of Performance
Minimum Service Distances / Spacing

Nullifire Fire Stopping Brochure
Specification and Design Guidance Document 2024


All orders are usually despatched within 24 hours of receiving cleared payment (Mon–Fri).



The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control. 

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.  

Brand:
Nullifire
weight:
310.0
Product Condition:
New
Updating Order Details
Please do not refresh or navigate away from the page!
Product Added to your Cart
x

-------- OR --------