A jet spray nozzle for hose reels gives the user a controllable jet of water when extinguishing a fire. The nozzle simply pushes into the hose and is ready to use.

This plastic blank plug is used to seal off water supplies from dirt and contamination. It is not pressure resistant so can only be used as a dust cover.

21/2" Cooper spray aluminium nozzle with off position, 5/8 jet and spray

Our 65mm layflat fire hose is constructed from close woven twill polyester filament yarns with synthetic rubber lining. It comes as a 23 meter length and complete with wired on alloy couplings.

Manufactured in light alloy, the lever operated nozzle has lever to operate the on and off positions to prevent/release the water supply. It is for use with 65mm layflat hosing.

Firechief SBP1 Aluminium Alloy 2 " Blank Plug. Blank plugs are used to seal off water supplies from dirt and contamination. This aluminium blank plug is pressure resistant.

A jet spray nozzle for hose reels gives the user a controllable jet of water when extinguishing a fire. The nozzle simply pushes into the hose and is ready to use.

The purpose of the beaded hose guide is to bring the hose off the reel straight to avoid the hose falling out the side and becoming tangled. They are fixed nearby the reel and the hose fed through. Typically...

Firechief 25mm fire hose is approved to EN694. This hose is an ideal purchase for replacing damaged hose on a reel without having the cost of replacing the full reel. Also, if the hose is not to be used...

Firechief 19mm fire hose is approved to EN694. This hose is an ideal purchase for replacing damaged hose on a reel without having the cost of replacing the full reel. Also, if the hose is not to be used...

Anti-tamper leather straps are used on globe valves to prevent unauthorised use of the water supply. The 350mm by 13mm wide strap provides a strong hold on the turning wheel tying it to the valve and then...

A single standpipe is used to dispense water to areas that do not have a running water supply (such as caravan sites etc). It is a freestanding pipe made of aluminium alloy with 2 1/2" female BSRT (British...

This standpipe has two inlets to allow more than one hose to be connected at a time. It is used to dispense water to areas that do not have a running water supply. It also has a check valve which prevents...

Anti-tamper leather straps are used on globe valves to prevent unauthorised use of the water supply. The 560mm by 13mm wide strap provides a strong hold on the turning wheel tying it to the valve and then...

Firechief HKB2 Steel Hydrant Key and Bar. This Hydrant key and bar is used for turning the water supply on and off via the hydrant. Internal dimension of key - 35mm square

Firechief SPC1 Contractors Standpipe c/w Double Check Valve. Our contractor's standpipe is a tap which can be connected to a hydrant to dispense water to areas that do not have a running water supply.

2.5" instantaneous couplings in aluminium alloy with double-ribbed tailform, manufactured to BS336

Standpipes with a check valve are used to dispense water to areas that do not have a running water supply. The check valve prevents water returning back through the standpipe once it has passed through....

Firechief HKB1 Alloy Hydrant Key and Bar. This Hydrant key and bar is used for turning the water supply on and off via the hydrant. It is made from a lightweight aluminium alloy construction.

Anti-tamper leather straps are used on globe valves to prevent unauthorised use of the water supply. The 560mm by 13mm wide strap provides a strong hold on the turning wheel tying it to the valve and then...

This standpipe has two inlets to allow more than one hose to be connected at a time. It is used to dispense water to areas that do not have a running water supply.