A jet spray nozzle for hose reels gives the user a controllable jet of water when extinguishing a fire. The nozzle simply pushes into the hose and is ready to use.

Firechief FWC25-B 25mm Flexible Water Inlet Pipe-Red. The 25mm flexible water inlet pipe is suitable for use with swinging hose reels only (RMSA25-B, RMSA19-B, RMSM25-B, RMSM19-B).

Brass Mechanism

Firechief 19mm x 30m Fire Hose Approved to EN694 Can be used within -20 C to 60 C temperature range Ideal for applications where long intervals can occur between use Designed for emergency use

2.5" instantaneous couplings in aluminium alloy with double-ribbed tailform, manufactured to BS336

This is a replacement washer for 2.5" alloy couplings (Product code: 103-1000)

19mm gate valves are used for stopping (or allowing) the water feed from the main supply to the hose reel. They would generally only be required for situations where the hose wasn't going to be used for...

25mm gate valves are used for stopping (or allowing) the water feed from the main supply to the hose reel. They would generally only be required for situations where the hose wasn't going to be used for...

21/2" Cooper spray aluminium nozzle with off position, 5/8 jet and spray

Firechief HKB1 Alloy Hydrant Key and Bar. This Hydrant key and bar is used for turning the water supply on and off via the hydrant. It is made from a lightweight aluminium alloy construction.

Firechief HKB2 Steel Hydrant Key and Bar. This Hydrant key and bar is used for turning the water supply on and off via the hydrant. Internal dimension of key - 35mm square

Anti-tamper leather straps are used on globe valves to prevent unauthorised use of the water supply. The 350mm by 13mm wide strap provides a strong hold on the turning wheel tying it to the valve and then...

Anti-tamper leather straps are used on globe valves to prevent unauthorised use of the water supply. The 560mm by 13mm wide strap provides a strong hold on the turning wheel tying it to the valve and then...

Firechief SBP1 Aluminium Alloy 2 " Blank Plug. Blank plugs are used to seal off water supplies from dirt and contamination. This aluminium blank plug is pressure resistant.

This plastic blank plug is used to seal off water supplies from dirt and contamination. It is not pressure resistant so can only be used as a dust cover.

A single standpipe is used to dispense water to areas that do not have a running water supply (such as caravan sites etc). It is a freestanding pipe made of aluminium alloy with 2 1/2" female BSRT (British...

Standpipes with a check valve are used to dispense water to areas that do not have a running water supply. The check valve prevents water returning back through the standpipe once it has passed through....

This standpipe has two inlets to allow more than one hose to be connected at a time. It is used to dispense water to areas that do not have a running water supply.

This standpipe has two inlets to allow more than one hose to be connected at a time. It is used to dispense water to areas that do not have a running water supply. It also has a check valve which prevents...

Firechief SPC1 Contractors Standpipe c/w Double Check Valve. Our contractor's standpipe is a tap which can be connected to a hydrant to dispense water to areas that do not have a running water supply.

Single standpipe in galvanised tube with single brass bibtap, 3/4" bore with double check valve 2 London Pattern Thread at base connection 22mm hose union fitting to fit hose with inside diameter of 2...