Technical data

Usage Guidelines

Preparation

• All installers should have received training on the handling procedures required by the manufacturers of CPVC pipes on their products.
• All surfaces must be clean and sound, free from dirt, grease and any other contamination. Cleaning materials used must be approved & recommended by the CPVC pipes manufacturer.
• Check FS719 specification is suitable for substrate, fire rating, annular space and seal depth.
• We recommend that the surface of substrate temperature be +5°C or above at the time of application. Contact Technical Services for
• advice regarding lower temperature application.

Application

For full application details, refer to product data sheet.

Product Data Sheet Links

FS719 Technical Data Sheet
FS719 Safety Data Sheet
FS719 Double Intubatt Technical Drawing
FS719 Single Intubatt Technical Drawing
FS719 Direct To Substrates Technical Drawing
FS719 Sleeved CPVC Technical Drawing
Specification and Design Guidance Document 2024

Further Assistance

Further assistance or information can be obtained by calling the technical team on 02476 422200.

All orders are usually despatched within 24 hours of receiving cleared payment (Mon–Fri).

The above information is based on current test data, health and safety information and application instructions supplied by our suppliers and manufacturers of the products. It is supplied for guidance and to the best of our knowledge is true and accurate. Customers should satisfy themselves to the suitability of the products in its intended use and no guarantee is given or implied as the conditions of actual use are beyond our control. If in doubt the customer should consult the designer of the project or the local building control. 

Fire Stopping Shop, disclaim any liability for loss, damage or other expense which may arise from the use of this information, data or products refereed to and reserve the right to amend or change any details without notice. This statement does not affect your statuary rights.